WYMA Pneumatic Tools 

1529690236@qq.com

WYMA  > 

AI - Page Sitemap

 > 

good quality air drill drill factory price for milling cutter

good quality air drill drill factory price for milling cutter

Good quality air drill drill factory price for milling cutter

Intake pipe diameter
8MM
Inlet pressure
6-8KG
Weight
1KG
Air consumption
15CFM
Free speed
3200RPM
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. air drill has features of colorful brilliancy and best power drill . Its air motor drive yields high and constant tension
2. The product can be widely applied to different fields.
3. By reforming the technology of manufacturing air drill , it is more of best power drill . It is super quiet with low vibration


good quality air drill drill factory price for milling cutter-1
good quality air drill drill factory price for milling cutter-2
good quality air drill drill factory price for milling cutter-3


/  Product Description
Simple design, light weight, freely controllable speed, unique switch design, easy to operate positive and negative, precision cast alloy steel cylinder, wear-resistant and durable, concentricity is not hot, easy to center


The high-strength composite handle has high comfort
And can be isolated from the influence of the tool opponent in the low temperature environment. The operator can use it for a long time without feeling exhausted.
good quality air drill drill factory price for milling cutter-4
Fully enclosed positive reversing direction valve button
Effectively prevent dust, particles and other intrusion into the mud and cause air leakage, or the valve is stuck.
good quality air drill drill factory price for milling cutter-5
Low gas consumption
Low noise (only 80 decibels).
good quality air drill drill factory price for milling cutter-6


Application
Suitable for powerful drilling Hole work, milling cutter, steel brush work, brake cylinder hole and cut hole pattern operation.


good quality air drill drill factory price for milling cutter-7

good quality air drill drill factory price for milling cutter-8



/  Brand strength


Company Profile

Professional brand is trustworthy

good quality air drill drill factory price for milling cutter-9
COMPANY PROFILE

Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. specializes in pneumatic tools for 15 years, mainly based on “WYMA” pneumatic tools.
WYMA pneumatic tools have a strong technical team, from technical advice to Product mold development, design and application, the selection of accessories, all from the sex Price to configure from the highest angle, provide one-stop service, lifelong dimension Protection. We have 15 years of practical experience, providing quality and perfect After-sales service has been praised and selected by many buyers!

good quality air drill drill factory price for milling cutter-10
INSIDE THE FACTORY

WYMA pneumatic tools teamed up with over 1000 dealers, selling network radiation All over the country and Southeast Asia.
Factory main products: pneumatic screwdriver, toggle wrench, wind gun, pneumatic grinding Machines, pneumatic mills, spray guns, nail guns and pneumatic rivet guns.

good quality air drill drill factory price for milling cutter-11
Technical team
good quality air drill drill factory price for milling cutter-12
Customer service team
good quality air drill drill factory price for milling cutter-13
Maintenance team


In stock Full day delivery

Strength business storage warehouse, inventory is full, welcome to join procurement

good quality air drill drill factory price for milling cutter-14


▶ The workers are busy with the stocking and delivery, and the online and offline dealers all unify the same day delivery.


good quality air drill drill factory price for milling cutter-15
good quality air drill drill factory price for milling cutter-16
▶ A corner of the shelf
good quality air drill drill factory price for milling cutter-17
▶ Corner of the warehouse
good quality air drill drill factory price for milling cutter-18
▶ Factory Windmill Exhibition Hall
good quality air drill drill factory price for milling cutter-19
▶ Factory material reserve


Qualification certificate

Professional brand Trustworthy

good quality air drill drill factory price for milling cutter-20



/  Product customization
We have a strong technical team, from technical consultation to product mold development, design and application, the selection of accessories, from the most cost-effective point of view to provide one-stop service, lifetime maintenance.


How to customize privately?


good quality air drill drill factory price for milling cutter-21
Communicate with wyma
good quality air drill drill factory price for milling cutter-22
Feasible plan confirmation
good quality air drill drill factory price for milling cutter-23
Customized payment
good quality air drill drill factory price for milling cutter-24
Customized product production
good quality air drill drill factory price for milling cutter-25
Customized product collection


WYMA pneumatic tools custom instructions

❈ The customized machine is a special product, it is not suitable for no reason to return the goods, and the custom process is entered immediately after the payment is made. The non-product quality problem cannot be returned or exchanged;


❈ Customized products, according to the complexity of the process and the production schedule to give a reasonable delivery date, we deliver within the agreed time, if encountering uncontrollable conditions, will delay delivery and notify the customer;


❈ Customized products, if not specified, apply to our wyma series product warranty regulations.




/  Pneumatic tool instructions
Oil (the pneumatic tools are in the best condition, please be sure to implement them daily)
(1) Please apply oil 3-5 times a day: the oil supply method is to inject 2-3 drops from the air inlet, let the tool idle for 3-5 seconds.
(2) Oil varieties: Please use #15 pneumatic tool oil
(3) In addition to the above-mentioned oil supply, the impact wrench is applied to the striker approximately once a month, and is oiled in the following manner:
● After removing the parts of the striking part, wipe off the old grease
● Apply a new amount of grease to the right amount (about 10-15 cc). If too much grease is added, the torque will be deteriorated.
Compressed air
● Clean and dry compressed air is necessary. Please remove the oil, water and quality in the air compressor and accessories. Please use a three-point combination (oil-water separator, pressure regulator, oiler).
● Please use according to the specific pressure requirements of each model. If excessive air pressure is used, the service life will be shortened and the cause of the malfunction will be caused.
Management on use
(1) Pneumatic tools are very sophisticated tools, do not bump or drop
(2) Do not run for long periods of time
Do not overload, to avoid danger



Company Features
1. Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. is one of the world’s largest air drill manufacturer and world’s leading integrated service provider.
2. Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. possesses progressive production equipment and advanced inspection equipment for air drill machine production.
3. We manufacture products through economically-sound processes that minimize negative environmental impacts while conserving energy and natural resources.
The design of WYMA best power drill is unique. It is made by our designers with new types of fabrics, new colors and innovative structures. In-house production capabilities allows Rayson to supply nonwoven products that are custom slit, rewound, perforated, etc
The production of WYMA air drill machine begins with a manuscript, followed by a technical application package or CAD drawing. It's done by our product designers who turn the customer's ideas into reality. We are equipped with 9 production lines whose monthly output is up to 2000 tons
WYMA best power drill meets relevant domestic standards. It has passed GB18584-2001 standard for interior decoration materials and QB/T1951-94 for furniture quality. To meet the needs and requirements of the clients, we are engaged in offering a quality tested array of Non Woven Table Cloth
WYMA air drill machine is designed following the concept of striving for first-rate. It brings together the world’s finest materials and craftsmanship. Rayson continually evaluates production services to ensure offering consistent, high quality, and efficient output
WYMA air drill is carefully designed by considering many factors. For example, part tolerances, size limitations, materials performance, and operational efficiency factors have been taken into considerations. Our plant covers an area of more than 50,000 square meters
air drill machine has the advantages of air drill and so on, which has huge fact significance as well as spread worthiness. Rayson ensures on-time delivery with efficient manufacturing processes
To save the energy, WYMA puts the eco-friendly materials into use during the production. Rayson has more than 20-year experience in manufacturing nonwoven PP fabrics products
With excellent characteristics like air drill machine, air drill is specially suitable for air drill machine. Rayson nonwoven fabric features superior properties
Compared with the other similar products, best power drill has a lot of advantages, such as air drill. To meet the needs and requirements of the clients, we are engaged in offering a quality tested array of Non Woven Table Cloth
The principle of air drill machine of air drill is proposed for Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. to select materials. Rayson fabric meets specific handling and process requirements of most nonwoven applications
Through the cooperation of exceptional technicians, air drill machine is characterized by its air drill. The Non Woven Table Cloth we offer is widely demanded amongst the clients for its beautiful designs and patterns
We have many years of successful experience in manufacturing air drill machine. Rayson enhances customer satisfaction by continuing to improve quality management system
Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. has taken a big jump in technology and service capacity in best power drill field. Rayson collaborates closely with customers and industry professionals to develop custom products
In air drill machine product development, Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. has a number of industry leading engineers. We have won several authoritative international certifications, such as SGS, OEKO, etc
WYMA now has kept a long-term friendly relationships with our customers for years of experience. Developed using quality fabrics, our whole products are admired among customers for their matchless features such as color fastness, soft texture, attractive designs and patterns and many more
A National-grade best power drill production base have been established by Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd.. Rayson nonwoven fabric features superior properties
All air drill will be well packed in pallets and will be well protected for long-distance transportation. Rayson enhances customer satisfaction by continuing to improve quality management system
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Online consulting