WYMA Pneumatic Tools 

1529690236@qq.com

WYMA  > 

AI - Page Sitemap

 > 

gun pneumatic paint gun factory price for machinery WYMA

gun pneumatic paint gun factory price for machinery WYMA

Gun pneumatic paint gun factory price for machinery WYMA

Intake pipe diameter
5MM
Inlet pressure
4-8KG
Air consumption
9CFM
Capacity
1000ML
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
Industrial Pneumatic Tools produced by WYMA Pneumatic Tools is mostly used in the following aspects.WYMA Pneumatic Tools always pays attention to customers. According customers' actual needs, we could customize comprehensive and professional solutions for them.
Company Advantages
1. The production process of WYMA pneumatic paint gun is strictly and constantly monitored. From the power module, plate test to assembly, each step is carried out by our staff by adopting a 24-hour shift system.
2. Product quality meets industry standards and has passed international certification.
3. With its advanced control system, the product helps increase productivity. It finally decreases production time and increases output.


gun pneumatic paint gun factory price for machinery WYMA-1
gun pneumatic paint gun factory price for machinery WYMA-2
gun pneumatic paint gun factory price for machinery WYMA-3


/  Product Description
It is suitable for automobile spraying, industrial furniture spraying, machinery/transmission/decoration/woodworking and other oily water-based topcoat spraying.


Tlow regulating valve
The output of toner paint is increasing and the output of toner paint is decreasing.
gun pneumatic paint gun factory price for machinery WYMA-4
Trigger Switch
The switch is divided into two stages. The first stage can blow off the dust of the product and the second stage can send out the paint.
gun pneumatic paint gun factory price for machinery WYMA-5
Air volume adjustment
Turn the air adjusting knob clockwise to adjust the air volume, while turn counter-clockwise to adjust the air volume.
gun pneumatic paint gun factory price for machinery WYMA-6


Application
Paint Spraying Treatment of Surface Paint for Exquisite Materials such as Automobile/Home Appliances/Furniture.


gun pneumatic paint gun factory price for machinery WYMA-7

gun pneumatic paint gun factory price for machinery WYMA-8



/  Brand strength


Company Profile

Professional brand is trustworthy

gun pneumatic paint gun factory price for machinery WYMA-9
COMPANY PROFILE

Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. specializes in pneumatic tools for 15 years, mainly based on “WYMA” pneumatic tools.
WYMA pneumatic tools have a strong technical team, from technical advice to Product mold development, design and application, the selection of accessories, all from the sex Price to configure from the highest angle, provide one-stop service, lifelong dimension Protection. We have 15 years of practical experience, providing quality and perfect After-sales service has been praised and selected by many buyers!

gun pneumatic paint gun factory price for machinery WYMA-10
INSIDE THE FACTORY

WYMA pneumatic tools teamed up with over 1000 dealers, selling network radiation All over the country and Southeast Asia.
Factory main products: pneumatic screwdriver, toggle wrench, wind gun, pneumatic grinding Machines, pneumatic mills, spray guns, nail guns and pneumatic rivet guns.

gun pneumatic paint gun factory price for machinery WYMA-11
Technical team
gun pneumatic paint gun factory price for machinery WYMA-12
Customer service team
gun pneumatic paint gun factory price for machinery WYMA-13
Maintenance team


In stock Full day delivery

Strength business storage warehouse, inventory is full, welcome to join procurement

gun pneumatic paint gun factory price for machinery WYMA-14


▶ The workers are busy with the stocking and delivery, and the online and offline dealers all unify the same day delivery.


gun pneumatic paint gun factory price for machinery WYMA-15
gun pneumatic paint gun factory price for machinery WYMA-16
▶ A corner of the shelf
gun pneumatic paint gun factory price for machinery WYMA-17
▶ Corner of the warehouse
gun pneumatic paint gun factory price for machinery WYMA-18
▶ Factory Windmill Exhibition Hall
gun pneumatic paint gun factory price for machinery WYMA-19
▶ Factory material reserve


Qualification certificate

Professional brand Trustworthy

gun pneumatic paint gun factory price for machinery WYMA-20



/  Product customization
We have a strong technical team, from technical consultation to product mold development, design and application, the selection of accessories, from the most cost-effective point of view to provide one-stop service, lifetime maintenance.


How to customize privately?


gun pneumatic paint gun factory price for machinery WYMA-21
Communicate with wyma
gun pneumatic paint gun factory price for machinery WYMA-22
Feasible plan confirmation
gun pneumatic paint gun factory price for machinery WYMA-23
Customized payment
gun pneumatic paint gun factory price for machinery WYMA-24
Customized product production
gun pneumatic paint gun factory price for machinery WYMA-25
Customized product collection


WYMA pneumatic tools custom instructions

❈ The customized machine is a special product, it is not suitable for no reason to return the goods, and the custom process is entered immediately after the payment is made. The non-product quality problem cannot be returned or exchanged;


❈ Customized products, according to the complexity of the process and the production schedule to give a reasonable delivery date, we deliver within the agreed time, if encountering uncontrollable conditions, will delay delivery and notify the customer;


❈ Customized products, if not specified, apply to our wyma series product warranty regulations.




/  Pneumatic tool instructions
Oil (the pneumatic tools are in the best condition, please be sure to implement them daily)
(1) Please apply oil 3-5 times a day: the oil supply method is to inject 2-3 drops from the air inlet, let the tool idle for 3-5 seconds.
(2) Oil varieties: Please use #15 pneumatic tool oil
(3) In addition to the above-mentioned oil supply, the impact wrench is applied to the striker approximately once a month, and is oiled in the following manner:
● After removing the parts of the striking part, wipe off the old grease
● Apply a new amount of grease to the right amount (about 10-15 cc). If too much grease is added, the torque will be deteriorated.
Compressed air
● Clean and dry compressed air is necessary. Please remove the oil, water and quality in the air compressor and accessories. Please use a three-point combination (oil-water separator, pressure regulator, oiler).
● Please use according to the specific pressure requirements of each model. If excessive air pressure is used, the service life will be shortened and the cause of the malfunction will be caused.
Management on use
(1) Pneumatic tools are very sophisticated tools, do not bump or drop
(2) Do not run for long periods of time
Do not overload, to avoid danger



Company Features
1. Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. is an enterprise specialized in pneumatic paint gun and owning high level of adaption, cohesion and reputation.
2. In terms of technology competency, Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. is solid and strong.
3. best paint sprayer is Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. original service philosophy, which fully shows its own superiority. Inquire now! Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. has established the service notion of handheld paint sprayer . Inquire now! The service concept of portable paint sprayer has been established in Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd.. Inquire now! To carry forward small spray gun is the base of Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd.'s work.
WYMA pneumatic paint gun is tested by an approved laboratory to identify harmful substances, color fastness, flammability, and fiber analysis in the fabric. This product acts as a safe and reliable lighting method
WYMA small spray gun is manufactured in mechanical rooms that are dedicated to mechanical equipment. It will go through stamping, CNC machining, and surface treating such as coating and lacquering. This product can instantly lighten up without any delay
WYMA pneumatic paint gun is professionally developed. Its development work is carried out by the expert R&D staff who have the knowledge of mechanical design automation and intelligent manufacturing technology, as well as the ability in solving practical engineering problems. Not producing heat, this product reduces the environmental burden
Material is also a key factor in determining the final machine performance of WYMA portable paint sprayer. Therefore, all of the materials and components have to be tested for mechanical properties. This product acts as a safe and reliable lighting method
All of the mechanical components of WYMA handheld paint sprayer are manufactured under sophisticated workmanship. The workmanship includes material preparation, material cleaning, cutting, stamping, spraying, and surface treating. This product allows for large areas of lighting
This product has long-lasting performance and strong usability.
The implementation of the quality control system ensures the product to be defect-free. This product features a good uniformity of illumination
The product is of high quality and meets industry quality standards. This product features easy of use and maintenance
The product has been tested by a third-party authoritative agency, which is a great guarantee on its high quality and stable functionality. Integrating with modern technology, it has a green lighting mode
The product is taken into seriously about its reliability and stability during the inspections. It is conducted by a strict and professional quality inspection team at every step. It has a strong base to withstand impacts
With our extensive expertise in this field, the quality of our products is the best. This product is quite efficient, consuming only little energy
Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. has renewed their ideas for handheld paint sprayer and promoted independence research ability over the years. The light of this product is soft and pure
Grasping best paint sprayer critical technologies improves Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd.'s independent portable paint sprayer developing ability. Not producing heat, this product reduces the environmental burden
Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. can provide professional service for cleaning best paint sprayer. This product provides a strong decorative effect
As a leading best paint sprayer enterprise, WYMA sells a wide range of products including small spray gun. This product features easy of use and maintenance
Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. makes himself develop rapidly by abundant design and manufacturing capacity. This product allows for large areas of lighting
Reliable quality can be seen in WYMA with its sophisticated design. This product is equipped with an infrared signal or wireless signal remote control
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Online consulting