WYMA Pneumatic Tools 

1529690236@qq.com

WYMA  > 

AI - Page Sitemap

 > 

professional impact wrench wrench manufacturer for power plants

professional impact wrench wrench manufacturer for power plants

Professional impact wrench wrench manufacturer for power plants

Maximum torque
610N.M
No load speed
8000RPM
Drive head size
1/2''
Drive head length
1''
Intake pipe diameter
10MM
Inlet pressure
8kg/c㎡
Weight
2.8KG
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • WYMA Pneumatic Tools always put customers first and provides them with sincere and quality services.
Company Advantages
1. WYMA air impact wrench for sale is produced under complete and complicated procedures conducted by professional technicians. These procedures include molding, applying on the pigment, low baking, and high-temperature sintering.
2. The product exceeds industry standards in performance, durability and usability.
3. With the advanced equipment, we concentrate on the quality of the products.
4. With solid technical strength, Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. has strong capability of [核心关键词 processing, development and production.


professional impact wrench wrench manufacturer for power plants-1
professional impact wrench wrench manufacturer for power plants-2
professional impact wrench wrench manufacturer for power plants-3


/  Product Description
WYMA pneumatic tools are diversified and complete in variety, including: pneumatic screwdrivers, pneumatic wrenches, wind guns, pneumatic die grinders, pneumatic engraved pens, pneumatic sandpaper machines, spray guns, pneumatic nail guns and pneumatic rivet guns, etc. product.


The single hammer has no pin impact structure
professional impact wrench wrench manufacturer for power plants-4
Large output torque
professional impact wrench wrench manufacturer for power plants-5
Light weight
professional impact wrench wrench manufacturer for power plants-6
Long service life
professional impact wrench wrench manufacturer for power plants-7


Application
It is suitable for large-scale vehicle tire replacement, large-scale mechanical disassembly, large-scale power plants and shipbuilding and other large projects.


professional impact wrench wrench manufacturer for power plants-8
professional impact wrench wrench manufacturer for power plants-9
professional impact wrench wrench manufacturer for power plants-10



/  Brand strength


Company Profile

Professional brand is trustworthy

professional impact wrench wrench manufacturer for power plants-11
COMPANY PROFILE

Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. specializes in pneumatic tools for 15 years, mainly based on “WYMA”  pneumatic tools.
WYMA pneumatic tools have a strong technical team, from technical advice to Product mold development, design and application, the selection of accessories, all from the sex Price to configure from the highest angle, provide one-stop service, lifelong dimension Protection. We have 15 years of practical experience, providing quality and perfect After-sales service has been praised and selected by many buyers!

professional impact wrench wrench manufacturer for power plants-12
INSIDE THE FACTORY

WYMA pneumatic tools teamed up with over 1000 dealers, selling network radiation All over the country and Southeast Asia.
Factory main products: pneumatic screwdriver, toggle wrench, wind gun, pneumatic grinding Machines, pneumatic mills, spray guns, nail guns and pneumatic rivet guns.

professional impact wrench wrench manufacturer for power plants-13
Technical team
professional impact wrench wrench manufacturer for power plants-14
Customer service team
professional impact wrench wrench manufacturer for power plants-15
Maintenance team


In stock Full day delivery

Strength business storage warehouse, inventory is full, welcome to join procurement

professional impact wrench wrench manufacturer for power plants-16


▶ The workers are busy with the stocking and delivery, and the online and offline dealers all unify the same day delivery.


professional impact wrench wrench manufacturer for power plants-17
professional impact wrench wrench manufacturer for power plants-18
▶ A corner of the shelf
professional impact wrench wrench manufacturer for power plants-19
▶ Corner of the warehouse
professional impact wrench wrench manufacturer for power plants-20
▶ Factory Windmill Exhibition Hall
professional impact wrench wrench manufacturer for power plants-21
▶ Factory material reserve


Qualification certificate

Professional brand Trustworthy

professional impact wrench wrench manufacturer for power plants-22



/  Product customization
We have a strong technical team, from technical consultation to product mold development, design and application, the selection of accessories, from the most cost-effective point of view to provide one-stop service, lifetime maintenance.


How to customize privately?


professional impact wrench wrench manufacturer for power plants-23
Communicate with wyma
professional impact wrench wrench manufacturer for power plants-24
Feasible plan confirmation
professional impact wrench wrench manufacturer for power plants-25
Customized payment
professional impact wrench wrench manufacturer for power plants-26
Customized product production
professional impact wrench wrench manufacturer for power plants-27
Customized product collection


WYMA pneumatic tools custom instructions

❈ The customized machine is a special product, it is not suitable for no reason to return the goods, and the custom process is entered immediately after the payment is made. The non-product quality problem cannot be returned or exchanged;


❈ Customized products, according to the complexity of the process and the production schedule to give a reasonable delivery date, we deliver within the agreed time, if encountering uncontrollable conditions, will delay delivery and notify the customer;


❈ Customized products, if not specified, apply to our wyma series product warranty regulations.




/  Pneumatic tool instructions
Oil (the pneumatic tools are in the best condition, please be sure to implement them daily)
(1) Please apply oil 3-5 times a day: the oil supply method is to inject 2-3 drops from the air inlet, let the tool idle for 3-5 seconds.
(2) Oil varieties: Please use #15 pneumatic tool oil
(3) In addition to the above-mentioned oil supply, the impact wrench is applied to the striker approximately once a month, and is oiled in the following manner:
● After removing the parts of the striking part, wipe off the old grease
● Apply a new amount of grease to the right amount (about 10-15 cc). If too much grease is added, the torque will be deteriorated.
Compressed air
● Clean and dry compressed air is necessary. Please remove the oil, water and quality in the air compressor and accessories. Please use a three-point combination (oil-water separator, pressure regulator, oiler).
● Please use according to the specific pressure requirements of each model. If excessive air pressure is used, the service life will be shortened and the cause of the malfunction will be caused.
Management on use
(1) Pneumatic tools are very sophisticated tools, do not bump or drop
(2) Do not run for long periods of time
Do not overload, to avoid danger



Company Features
1. Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. gives zest and enthusiasm in designing and manufacturing impact wrench . We provide the best product and the dedicated service our customers deserve.
2. Our products are hot sale in Southern Asia, America, and Australia countries, and win a good reputation. We have provided product solutions to many international famous brands over these years.
3. Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. has always been guided by the strategy of air impact wrench for sale . Contact us! In recent years, Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. adhered to the concept of innovation and development, vigorously promoted the optimization of air impact wrench . Contact us! Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. will seize the opportunity to continue the rapid and healthy development of itself in best air wrenches industry. Contact us! Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. adheres to power wrench to lead and promote the sustainable and healthy development of the company. Contact us!
Product Description

 

GS-8588H 1/2” CORDLESS IMPACT WRENCH (18V)
DESCRIPTION

* VOLTAGE: DC 18.0 V 3.0AH.

* MAX. TORQUE: 600 N.M.

* NO-LOAD SPEED: 0 ~ 1,800 R.P.M.

* I.P.M.: 2,400

* 3.0AH LI-ION BATTERY

* WEIGHT (WITH 3.0AH BATTERY): 2.6 KGS.

* PACKING: 1 SET/BLOW CASE, 4 SETS/CTN

 

Main Functions
WYMA air impact wrench for sale is strictly scrutinized. It has gone through the on-line monitoring for its technological parameter, such as its dyeing saturability, weaving fineness, fabric strength, etc.
During the production, WYMA air impact wrench for sale has to go through a series of processes such as CAD shape design, high temperature and pressure molding, stamping, sewing or stitching, etc.
WYMA power wrench is made with suitable materials. The designer determines the material according to the goods. For example, if the displayed goods are heavy, the better choice is wood/wire/plastic material.
WYMA air impact wrench for sale is scrutinized strictly. It is required to go through the quality tests including short circuit protection, maximum power output, and energy transforming efficiency.
The rigorous quality control of WYMA power wrench is conducted throughout all production stages to guarantee the dimension and specification is within the tolerance limit in mechanical seals industry.
The product features a long service life. The light-emitting element adopts a high-composite material to minimize the aging effect that caused by long-time high-temperature working.
The product has very high ratings when it comes to CRI. Its light is close to the daylight's value, reflecting colors truly and naturally.
The product can light up instantly. Its high-intensity illuminating elements can not only withstand the impact of instantaneous current but also enter the normal working state for the first time.
The product features minimal temperature variations. It has the unique built-in technology which is conducive to control its working temperature.
The product features excellent shock resistance. Its lamp shade is made of aluminum alloy, which allows it to withstand any collision.
The product is not prone to electromagnetic influence. It has passed the electromagnetic compatibility(EMC) test and is able to withstand extreme weather conditions such as thunderstrike.
The product meets the sustainable development requirements. It can help users reduce carbon footprint and save them on electricity bills.
People who use this product will find it does not produce squeaky or flickering noise, at the same time giving him or her the greatest eye comfort.
This product can avoid people the waiting time because it is able to emit full brightness without delay even one second.
Its long life is one of the biggest selling points of this product. People does not have to replace the bulb because it does not often burn out.
With all these features, this product does not need to be replaced frequently, saving a lot of maintenance resources and costs.
People will find that it is ok to turn this product on and off frequently and no problem will happen.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Online consulting