WYMA Pneumatic Tools 

1529690236@qq.com

WYMA  > 

AI - Page Sitemap

 > 

professional pneumatic impact wrench angle directly sale for power plants

professional pneumatic impact wrench angle directly sale for power plants

Professional pneumatic impact wrench angle directly sale for power plants

Maximum torque
80N.M
No load speed
170RPM
Drive head size
1/2''
Drive head length
1''
Intake pipe diameter
10MM
Inlet pressure
8kg/c㎡
Weight
1.2KG
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


professional pneumatic impact wrench angle directly sale for power plants-1
professional pneumatic impact wrench angle directly sale for power plants-2
professional pneumatic impact wrench angle directly sale for power plants-3


/  Product Description
WYMA pneumatic tools are diversified and complete in variety, including: pneumatic screwdrivers, pneumatic wrenches, wind guns, pneumatic die grinders, pneumatic engraved pens, pneumatic sandpaper machines, spray guns, pneumatic nail guns and pneumatic rivet guns, etc. product.


The single hammer has no pin impact structure
professional pneumatic impact wrench angle directly sale for power plants-4
Large output torque
professional pneumatic impact wrench angle directly sale for power plants-5
Light weight
professional pneumatic impact wrench angle directly sale for power plants-6
Long service life
professional pneumatic impact wrench angle directly sale for power plants-7


Application
It is suitable for large-scale vehicle tire replacement, large-scale mechanical disassembly, large-scale power plants and shipbuilding and other large projects.


professional pneumatic impact wrench angle directly sale for power plants-8
professional pneumatic impact wrench angle directly sale for power plants-9
professional pneumatic impact wrench angle directly sale for power plants-10



/  Brand strength


Company Profile

Professional brand is trustworthy

professional pneumatic impact wrench angle directly sale for power plants-11
COMPANY PROFILE

Foshan Nanhai Haiyirong Pneumatic Tools Co., Ltd. specializes in pneumatic tools for 15 years, mainly based on “WYMA”  pneumatic tools.
WYMA pneumatic tools have a strong technical team, from technical advice to Product mold development, design and application, the selection of accessories, all from the sex Price to configure from the highest angle, provide one-stop service, lifelong dimension Protection. We have 15 years of practical experience, providing quality and perfect After-sales service has been praised and selected by many buyers!

professional pneumatic impact wrench angle directly sale for power plants-12
INSIDE THE FACTORY

WYMA pneumatic tools teamed up with over 1000 dealers, selling network radiation All over the country and Southeast Asia.
Factory main products: pneumatic screwdriver, toggle wrench, wind gun, pneumatic grinding Machines, pneumatic mills, spray guns, nail guns and pneumatic rivet guns.

professional pneumatic impact wrench angle directly sale for power plants-13
Technical team
professional pneumatic impact wrench angle directly sale for power plants-14
Customer service team
professional pneumatic impact wrench angle directly sale for power plants-15
Maintenance team


In stock Full day delivery

Strength business storage warehouse, inventory is full, welcome to join procurement

professional pneumatic impact wrench angle directly sale for power plants-16


▶ The workers are busy with the stocking and delivery, and the online and offline dealers all unify the same day delivery.


professional pneumatic impact wrench angle directly sale for power plants-17
professional pneumatic impact wrench angle directly sale for power plants-18
▶ A corner of the shelf
professional pneumatic impact wrench angle directly sale for power plants-19
▶ Corner of the warehouse
professional pneumatic impact wrench angle directly sale for power plants-20
▶ Factory Windmill Exhibition Hall
professional pneumatic impact wrench angle directly sale for power plants-21
▶ Factory material reserve


Qualification certificate

Professional brand Trustworthy

professional pneumatic impact wrench angle directly sale for power plants-22



/  Product customization
We have a strong technical team, from technical consultation to product mold development, design and application, the selection of accessories, from the most cost-effective point of view to provide one-stop service, lifetime maintenance.


How to customize privately?


professional pneumatic impact wrench angle directly sale for power plants-23
Communicate with wyma
professional pneumatic impact wrench angle directly sale for power plants-24
Feasible plan confirmation
professional pneumatic impact wrench angle directly sale for power plants-25
Customized payment
professional pneumatic impact wrench angle directly sale for power plants-26
Customized product production
professional pneumatic impact wrench angle directly sale for power plants-27
Customized product collection


WYMA pneumatic tools custom instructions

❈ The customized machine is a special product, it is not suitable for no reason to return the goods, and the custom process is entered immediately after the payment is made. The non-product quality problem cannot be returned or exchanged;


❈ Customized products, according to the complexity of the process and the production schedule to give a reasonable delivery date, we deliver within the agreed time, if encountering uncontrollable conditions, will delay delivery and notify the customer;


❈ Customized products, if not specified, apply to our wyma series product warranty regulations.




/  Pneumatic tool instructions
Oil (the pneumatic tools are in the best condition, please be sure to implement them daily)
(1) Please apply oil 3-5 times a day: the oil supply method is to inject 2-3 drops from the air inlet, let the tool idle for 3-5 seconds.
(2) Oil varieties: Please use #15 pneumatic tool oil
(3) In addition to the above-mentioned oil supply, the impact wrench is applied to the striker approximately once a month, and is oiled in the following manner:
● After removing the parts of the striking part, wipe off the old grease
● Apply a new amount of grease to the right amount (about 10-15 cc). If too much grease is added, the torque will be deteriorated.
Compressed air
● Clean and dry compressed air is necessary. Please remove the oil, water and quality in the air compressor and accessories. Please use a three-point combination (oil-water separator, pressure regulator, oiler).
● Please use according to the specific pressure requirements of each model. If excessive air pressure is used, the service life will be shortened and the cause of the malfunction will be caused.
Management on use
(1) Pneumatic tools are very sophisticated tools, do not bump or drop
(2) Do not run for long periods of time
Do not overload, to avoid danger



WYMA pneumatic impact wrench has passed the necessary safety testing. It has been tested with regard to chemicals (lead, flame retardants, formaldehyde, etc.), flammability, and mechanical hazards (sharp points and edges). The product is certified under RoHS and CE
In order to ensure consistency across an entire cabinet making project, WYMA pneumatic impact wrench is required to be completed on the same line. It is assembled, packaged, and loaded for shipping all on this line. With its superior illumination, the product allows people to drive with a greater sense of security
WYMA pneumatic impact wrench has been inclusively tested by third-party testing organizations. It has been tested in terms of edge lamination, polish, flatness, hardness, and straightness. There is no flash frequency caused during its operation
Different quality tests for WYMA impact wrench air tool have been carried out in the final production stage. These tests are an anti-aging test (ASTM D573), colorfastness to rubbing (AATCC 8), structural tearing strength or rigidity (SATRA TM30), etc. Featuring low power consumption, the product will not take up to much energy from the vehicle
During the design, many factors are considered in WYMA impact wrench air tool. They involve foot types, supportive points, comfort level, physical development features, and distribution of stress and weight. The product is able to facilitate fatigue-free and safe driving
The product is easy to clean. Its materials feature high density and airtightness, which not allows dirt or dust to enter into its pores. It provides drivers with sufficient lighting in bad weather such as fog and storms
High bacteria resistance is one of its biggest points. Its surface has been treated with a kind of specific antibiotic constituent which can kill the bacteria effectively. The improved illumination of this product allows drivers to enjoy a relaxed driving style
This product is moisture proof. Its materials have gone through damp-proof treatment, making it not affected by the wet condition. Its temperature-controlled compensation system handles the distribution between heat and power
The product is 100% scratch-proof. It is rigorously tested against abrasion and scratching, guaranteeing to keep the same brilliance of finish. With the 360 degrees adjustable socket, the product is convenient to use
The product is stain resistant. The product has been professionally burnished to create a smooth surface which is not easy to gather dust and dirt. The product is compatible with all kinds of vehicle models
The product is deformation resistant. Its hardened materials can stand up to the high temperature in the bathroom as well as heavy loads. With the 360 degrees adjustable socket, the product is convenient to use
The product has been widely known that it is able to last for a long time, which helps reduce maintenance and energy use in a building. The product is rated to IP68 waterproof level
The product is able to stay clean all the time and requires less maintenance, which will be a benefit for property developers to save budgets. Featuring low power consumption, the product will not take up to much energy from the vehicle
One of our buyers says:' this product suits well my project as it has unique design and beautiful lines and luster that keep up with the architectural trends.' The product is rated to IP68 waterproof level
The product has been widely recognized by most of the property developers for its attractive appearance and optimal durability. With advanced encapsulation technology, its LED chip is resistant to impacts
Before using this product, I've known that it will not cause any irreparable damage to the environment. So I choose it. - Said one of our customers. The product is designed for direct plug-in and replacement
Most of the property developers praised that this product is outstanding and satisfying because it can ensure the strength and durability of the building projects that are constructed. With its superior illumination, the product allows people to drive with a greater sense of security
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Online consulting